Mechanical Engineering

Automotive Systems Virtual Lab
Developed by : Dr.A.R.Mohanty, Contact email: amohanty@mech.iitkgp.ernet.in, Institute : Indian Institute of Technology, Kharagpur

New Link Automotive Systems Lab
Computer Integrated Manufacturing Systems
Developed by: Dr.Shankha Deb, Email: sankha.deb@mech.iitkgp.ernet.in, Institute: Indian Institute of Technology, Kharagpur

New Link of Computer Integrated Manufacturing Systems Lab
Structural Characterization of Materials Lab
Developed by : Dr.S.Das, Contact email: sdas@metal.iitkgp.ernet.in, Institute: Indian Institute of Technology Kharagpur

New link of Structural Characterization of Materials Lab || Virtual Lab Class & Remote Access Facility || Production and Measurements of X-rays || Phase Identification by XRD || Indexing of Powder Patterns || Estimation of Precise Lattice Parameter of Cubic Crystals || Determination of Retained Austenite in Quenched Steel || Measurement of Residual Stress by X-ray diffraction || Quantitative X-ray analysis using Rietveld Refinement || Evaluation Quiz for XRD || High Resolution Imaging with SEM || Effect of beam energy on SEM imaging || Charging effect on non conducting sample and its elimination || Powder sample preparation for SEM analysis || Back Scattered Electron Imaging || Fracture surface analysis by SEM || EDS analysis || Effect of Current Density on the Nucleation and Growth of Crystal Facets during Electrodeposition || Compositional and Morphological analysis of Meteorite samples || Case Study with SEM: Morphological analysis of disperse protein sample || Case Study with SEM: Morphological analysis of Nickel foams || Case Study with SEM: Formation of alpha titanium phase in beta titanium grains || Evaluation Quiz for SEM || Atomic Force Microscopy || Surface topography of a metallic sample in contact mode using Atomic Force Microscopy || Surface topography of a metallic sample in non contact mode using Atomic Force Microscopy || Surface topography of a metallic sample in using Scanning Tunnelling Microscopy. || Surface topography of a metallic sample in using Magnetic Force Microscope || Surface topography of a ceramic sample using Atomic Force Microscopy || Compositional Mapping using LFM || Surface roughness analysis of metallic sample in contact mode/non-contact mode using Atomic Forc || High Resolution AFM Imaging of Carbon Nanotubes coated with Sn-Based Material || Evaluation Quiz for AFM
Remote triggered Virtual Laboratory on Robotics and Robot Applications
Developed by Dr. S. K. Dwivedy, Institute: Indian Institute of Technology Guwahati

Teaching Aid for Dynamics and Control of Mechanical Systems
Developed by: Dr. Abhishek Gupta, Institute : Indian Institute of Technology Bombay

Remote Triggered Mechanical Vibrations Laboratory
Developed by: Dr. K.Gangadharan, Institute: National Institute of Technology Karnataka, Surathkal

Mechanics of Solids remote triggered laboratory
Developers: Dr. Prithviraj and Dr. Balakrishnan, Jointly by Institutes: National Institute of Technology Karnataka, Surathkal and Amrita University, Amritapuri

Energy Systems Virtual Laboratory
Developed by: Dr. Balakrishnan, Institute: Amrita University, Amritapuri

Virtual Lab on In-flight particle history
Developed by: Dr. Anish Upadhyay; Institute: Indian Institute of Technology Kanpur

Virtual Lab on Liquid Crystal Thermography
Developed by: Dr. Sameer Khandekar, Institute: Indian Institute of Technology Kanpur

Internet based Virtual CNC laboratory
Developer: Dr. S.S.Pandey, Institute: Indian Institute of Technology Bombay

Virtual Lab on Mechanical Vibrations
Developer: Dr. S.K.Dwivedi, Institute: Indian Institute of Technology Guwahati

Virtual remote robotics and mechatronics laboratory
Developer: Dr. S. Singaperumal, Institute; Indian Institute of Technology Madras

Mechanisms and Robotics lab
Developed by Dr. C.S.Kumar and Dr. K. Bhattacharyya, Institute: Indian Institute of Technology, Kharagpur

New Link of Mechanisms and Robotics Lab || KGP-50 || THE FOURBAR MECHANISM || THE SLIDER CRANK MECHANISM || INVERSE KINEMATICS OF A 6R ROBOT || FORWARD KINEMATICS OF A 4R ROBOT || CONTROL OF 6DOF ROBOT PUMA 560 IN REAL TIME || FORWARD KINEMATICS OF A 6R ROBOT
Kinematics & Dynamics of Mechanisms
Developed by : Dr. Kingshook Bhattacharya , Institute : Indian Institute of Technology Kharagpur

New Link of Kinematics and Dynamics of Mechanisms Laboratory
Model Based Fault detection lab
Developed by : Dr. Mihir Sarangi , Institute : Indian Institute of Technology Kharagpur

New Link of Model Based Fault Detection Lab
Robotics and Control Systems Simulation Laboratory
Developed by : Dr. C.S.Kumar , Institute : Indian Institute of Technology Kharagpur

New Link of Virtual Lab on Robotics and Control || FORWARD KINEMATICS OF A 4R ROBOT || FORWARD KINEMATICS OF A 6R ROBOT || INVERSE KINEMATICS OF A 6R ROBOT || CONTROL OF ONE DEGREE OF FREEDOM REVOLUTE TYPE ROBOT ARM WITH DC MOTOR || OPEN LOOP CHARACTERISTICS OF DC MOTOR || CLOSED LOOP CHARACTERISTICS OF DC MOTOR PROPORTIONAL CONTROL || CLOSED LOOP CHARACTERISTICS OF DC MOTOR PD CONTROL || CLOSED LOOP CHARACTERISTICS OF DC MOTOR PI CONTROL || CLOSED LOOP CHARACTERISTICS OF DC MOTOR PID CONTROL[CONTINUOUS TIME] || CLOSED LOOP CHARACTERISTICS OF DC MOTOR PID CONTROL[DISCRETE TIME]
Mechanical Systems and Signal Processing
Developed by : Dr. Amiya Mohanty , Institute : Indian Institute of Technology Kharagpur

New Link of Mechanical Systems and Signal Processing Lab || Mechanical Systems and Signal Processing
Virtual Laboratory on Mine Ventilation
Developed by : Dr. D Chakravarty, Institute: Indian Institute of Technology Kharagpur

New Link of Mine Ventilation Lab || Calibration of Inclined Tube Manometer by the use of Askania Minimeter || Familiarization with Assmann Psychrometer and Estimation of Psychrometric Properties of Mine || Establishment of the Relationship between Kata Cooling Power and Air Velocity || Determination of Shock Pressure Loss in Presence of Tub and Estimation of Drag coefficient. || Determination of Frictional Co-efficient of Mine Airways || Determination of method factor for a duct. || Calibration of Orifice Plate || Precise Traversing in a Duct using Pitot Tube || Performance Evaluation of Mine Evasee Present in a Ventilation System || Fan Rating Test
Virtual Lab for multiphase flow
Developed by : Dr. P.K.Das , Institute : Indian Institute of Technology Kharagpur

New Link of Multiphase Flow Lab
Rotating Machinery Fault Simulation
Developed by : Dr V.N.A.Naikan, Institute: Indian Institute of technology Kharagpur

New Link of Rotating Machinery Fault Simulation Lab || Machinery Soft-Foot || Diagnosis of Shaft Misalignment and its Effects || Static Balancing Studies of Rotary Systems || Oil Whirl Monitoring || Mechanical Looseness || Bearing Defects of Various Types || Sympathetic Vibrations and its Effects || Effects of Bent Shafts on Rotor Performance || Effect of Static Unbalance on Design Reliability
Virtual Laboratory for Simulation and Gaming
Developed by : Dr. B. Mahanty, Institute : Indian Institute of Technology Kharagpur

New Link of Simulation and Gaming Lab || Dynamics of quality fluctuations of an electronic product in a buyer's market || Simulation of auction markets || An illustration of Monte-Carlo Simulation in project invesments || Decision making in Production Distribution Systems using simulation || Simulation of organizational procurement || Modeling inventory decisions through simulation || Supply chain coordination through contracts || Demonstration of bullwhip effect in multi-echelon supply chain || A simulation model to illustrate limits to growth system archetype || Modeling supply chain risks using simulation
Laser Based Flow Diagnostics Laboratory
Developed by : Dr. P. K. Panigrahi , Institute : Indian Institute of Technology Kharagpur

Virtual laboratory Experience in Fluid and Thermal Sciences
Developed by : Dr. Niranjan Sahoo , Institute : Indian Institute of Technology Guwahati

Vibration and Acoustics Lab
Developed by : Dr. A.D.Sahasrabudhe , Institute : College of Engineering Pune

Mechanics of Machines Lab
Developed by : Dr. K V Gangadharan , Institute : National Institute of Technology Karnataka Surathkal

Mechatronics laboratory
Developed by : Dr. Tanuja Shorey , Institute : Indian Institute of Information Technology Design & Manufacturing, Jabalpur

Acoustics Laboratory
Developed by : Dr. Nachiketa Tiwari , Institute : Indian Institute of Technology Kanpur

Machine dynamics & vibration lab
Developed by : Dr. K V Gangadharan , Institute : National Institute of Technology Karnataka Surathkal

Manufacturing laboratory
Developed by : Dr. Vijay Kumar Gupta , Institute : Indian Institute of Information Technology Design & Manufacturing, Jabalpur

Micromanufacturing laboratory
Developed by : Dr. S.S.Pardeshi , Institute : College of Engineering Pune

FAB laboratory
Developed by : Dr. Ahuja BB , Institute : College of Engineering Pune

Metal Forming Lab
Developed by : Dr. Rahul S.Sharma , Institute : Dayalbagh Education Institute

General Purpose Production Shop Simulation Lab
Developed by : Dr. Deepu Philip , Institute : Indian Institute of Technology Kanpur

Material Response to Microstructural-, Mechanical- and Thermal- Stimuli
Developed by : Dr. Kantesh Balani , Institute : Indian Institute of Technology Kanpur

Biomaterials processing and characterisation
Developed by : Dr. Bikramjit Basu , Institute : Indian Institute of Technology Kanpur

Virtual Aerospace Structures Laboratory
Developed by : Dr. P.Sriram , Institute : Indian Institute of Technology Madras

Aerospace Virtual laboratory
Developed by : Dr. Sudhir Kamle , Institute : Indian Institute of Technology Kanpur

Virtual combustion and atomization laboratory
Developed by : Dr. D P Mishra , Institute : Indian Institute of Technology Kanpur

Copyright @ 2017 Under the NME ICT initiative of MHRD (Licensing Terms)
 Powered by AmritaVirtual Lab Collaborative Platform [ Ver 00.11. ]